powered by Smart Energy Solutions and TheCommonStead

​​VIDEOS, STEPS TO START, Q & A,  and PRESENTATION WITH CEO

ROI INSTANT ONLINE ESTIMATE CALCULATOR

I JUST WANT A QUOTE NOW

WHITE PAPERS

​

OTEA COMMERCIAL OPTIMIZATION SYSTEM

Available in All 50 States — COMMERCIAL ONLY
Made in USA • UL/CuL Listed • 10-Year Warranty • 25-Year Life Expectancy

​

“Over $16 BILLION of electricity in the U.S. is unusable energy — but still billable......U.S. Department of Energy

​

WHAT IS OTEA? (COMMERCIAL ONLY)

OTEA helps commercial facilities eliminate this waste by cleaning incoming power, drastically reducing (or eliminating) harmonic distortion, and optimizing electrical efficiency like an oil filter. OTEA is a commercial-grade electrical optimization system engineered to:

• Eliminate or reduce harmonic distortion (THD) as close to zero as the facility allows

• Capture and recycle reactive energy motors normally waste

• Stabilize voltage

• Reduce heat in wiring and motors

• Improve power factor

• Strengthen grounding at the panel

• Add surge protection to all circuits connected to the installation panel

• Extend the lifespan of motors, HVAC systems, refrigeration, pumps, and equipment

Think of OTEA like an electrical oil filter—cleaning and smoothing incoming power so your systems run cooler, smoother, and more efficiently.

Typical commercial savings range from 10% to 25% (up to 30% in some facilities).

WHY COMMERCIAL FACILITIES BENEFIT THE MOST

Commercial buildings depend heavily on motors and inductive loads:

• HVAC rooftop units

• Refrigeration systems

• Walk-in coolers & freezers

• Pumps & compressors

• Exhaust & make-up air equipment

• Production machinery

• Elevators

• Motors of all types

These motors generate harmonic distortion, heat, and reactive losses — all of which cost money.

OTEA directly addresses this by cleaning the power at the panel level.

PROVEN TECHNOLOGY SINCE 2001

Utility companies have used similar power-conditioning technology since 2001 to stabilize and clean the electrical grid.
OTEA brings the same principle to commercial panels, resulting in:

• Cleaner power

• Lower load

• Less wasted energy

• Reduced heat

• Improved equipment performance

• Lower utility bills

SAFETY, CERTIFICATION, & QUALITY

OTEA units are:

• UL Listed & CUL Listed

• NEMA 3R rated (indoor/outdoor)

• Built with self-healing capacitors

• Hermetically sealed aluminum housing

• Compatible with 50 Hz and 60 Hz systems

• Operational up to 480V three-phase

• Manufactured in Texas, USA

COMMERCIAL PRODUCT SPECIFICATIONS

OTEA Commercial 3-Phase Model

• Phase: Three-phase

• Voltage: Up to 480 V

• Dimensions: 10″ × 10″ × 6″

• Weight: 12.5 lbs

• Surge Protection: 2400 Joules

• Rating: NEMA 3R

• Application: Commercial electrical panels

(Residential model specifications removed — Energy Agent is Commercial Only.)

📉 AVERAGE SAVINGS EXAMPLES (TEXT VERSION — WIX COPY/PASTE SAFE)

Below are written average savings examples, based on typical commercial equipment behavior. These reflect how much power motors may use before and after installing an optimizer:

• Commercial Air Conditioning:
  Without optimizer: 100% usage
  With optimizer: approximately 85% usage

• Commercial Refrigeration:
  Without optimizer: 100% usage
  With optimizer: approximately 88% usage

• Commercial Heat Pump:
  Without optimizer: 100% usage
  With optimizer: approximately 82% usage

• Commercial Pumps / Motors:
  Without optimizer: 100% usage
  With optimizer: approximately 84% usage

Actual savings vary based on load type, equipment age, electrical infrastructure, and facility behavior.

⚡ SURGE PROTECTION — ACCURATE EXPLANATION

OTEA provides surge protection for every breaker and every circuit connected to the panel where the optimizer is installed.

If the facility has multiple electrical panels, each panel requires its own unit to achieve full-building surge protection.

☀️ SOLAR-READY & ENERGY-STACK COMPATIBLE

OTEA pairs seamlessly with commercial solar systems:

• Reduces motor consumption

• Stabilizes power

• Helps sell more energy back to the grid

• Lowers inverter stress

• Extends equipment life

Works excellent as pre-solar or post-solar optimization, and can be combined with BEAP utility bill bidding for even greater savings.

🛠️ OTEA COMMERCIAL INSTALLATION PROCESS

1. Provide Your Utility Bill

12 months of bills REQUIRED for warranty eligibility and proper system sizing.

2. Schedule the Site Survey

A licensed commercial contractor evaluates your panels, harmonic distortion levels, loads, and permitting requirements.

3. Receive Your Full Quote

Includes installation, labor, permits, equipment, and taxes.
Important: consult a tax advisor — OTEA often qualifies for major tax credits.

4. Confirm Your Order

Your representative (David) places the PO.

5. Permit Handling

We coordinate directly with the contractor to ensure all permits are filed correctly.

6. Installation Scheduling

Installation is arranged after permits are approved.

7. Installation Day

Most commercial installs take under one hour.

STRONGLY RECOMMENDED

• Take before and after photos

• Use an AMP Clamp ($30–$40 on Amazon) to measure amperage before and after installation

This provides real-time proof of reduced electrical load.

🧠 HOW OTEA WORKS (CLEAR SUMMARY)

• Motors produce harmonic distortion and reactive losses

• That wasted energy becomes heat & inefficiency

• OTEA captures and recycles it

• Goal: eliminate harmonic distortion entirely, or reduce it as close to zero as possible

• Motors run cooler

• Equipment lasts longer

• Electrical waste is reduced

• Bills drop

📈 COMMERCIAL BENEFITS

• Typical savings: 10%–25% (up to 30%)

• 12-month ROI common

• Surge protection for installed panel

• UL/CuL listed

• NEMA 3R rated

• Made in USA

• Qualifies for:

  • 30% Federal ITC

  • 10% U.S. Content Bonus Credit

  • Nonprofit/Church benefits

• Enhances solar systems

• Works with BEAP for additional billing-based savings

• Low cancellation rates

• Fast installation

• Reduces equipment strain and heat

🛡️ WARRANTY INFORMATION 

• 10-Year Warranty

• 25-Year Life Expectancy

• 12 months of utility bills REQUIRED for warranty review

• Warranty applies only if the unit is malfunctioning (ex: green light not on)

Warranty Returns Address

Smart Energy Solutions
3600 South Yosemite St, Suite 800
Denver, CO 80237

CLICK HERE FOR MORE OTEA Q&A  (with photo & videos)

​​