-Save & Earn with Dave-
OTEA
Optimizer
Optimizer Technology Energy Agent
HOME PAGE
made in the USA by SMART
OTEA Q & A
1. When did the technology first come out?
2001 at the utility level
2. Is there a patent on the technology
No, the patent expired in 2017, allowing open innovation and cost-effective production.
3. Are optimizers for both residential and commercial?
Yes, Single phase for residential and three phase for commercial
4. What testing has been done?
The optimizers are both UL listed and CUL (Canadian)
5. Are the optimizers available in all states?
Yes, US, Canada, Australia and New Zealand
6. What is the product warranty?
10 years and a product life expectancy
7. Can the optimizers be installed on an inside control panel?
Yes
8. How long does it take to install the optimizers?
Typical installation is 45 minutes
9. What is harmonic distortion or total harmonic distortion THD?
THD are spikes in the current and they are given off by electricity when it travels and by the devices on any an microgrid
inside the meter
10. Where are the optimizers installed for both residential and commercial?
The first step is to install the electric control panel. Testing with a Smart Answer box tester & APM clamps.
11. What equipment should an installer have?
-
Amp clamp tester that can measure power factor $3oo ish
-
Smart Answer Box for single phase and/or three phase units all (ordered directly from Smart)
-
Tools to anchor and install the product.
12. Can an install have both single phase and three phase in one use case?
Yes, a commercial installation can have both.
Example: office is single phase & production areas three phase.
13. How much do the units weigh?
5.5 pounds for the single phase units
12.5 pounds for three phase units
14. Do the optimizers provide surge protection?
Yes, 2300 to 2400 Jules
15. What are the measurements of the optimizers?
Single phase - 6” high, 6” wide, 4” inches deep
Three phase - 10” by 10” by 6”
16. What breaker sizes are used?
Two pole 20 to 30 amp breakers - specific to the control panel.
17. Who makes it? Where is it made?
Our valued partner at SMART builds them in Texas!
HINT HINT MADE IN THE USA PRODUCTS have a tax deduction
SPECIAL NOTE - For best results, take photos and share with installer prior to arrival.
17. Do they ground the whole house?
Yes for all breakers connected to that main panel
18. Can I take them with me if I move as a renter or owner? YES When selling as an owner you should inform the buyer of that in the sale of your home.
18. What do the optimizers look like?
​
​
​
​
19. Can both single-phase and three-phase units exist in one property?
Yes — for example, an office (single-phase) and production floor (three-phase).
20. What breaker size is required?
Use a two-pole 20 to 30 amp breaker appropriate for your control panel.
21. Can both single-phase and three-phase units exist in one property? Yes — for example, an office (single-phase) and production floor (three-phase).
​
Video Summary of OTEA
produced by Smart Energy Solutions and presented by Energy Agent
Installer Overview Demo
Installer Overview Video
Video with CEO Rex coming soon
Desktop Demo in Action
"Over $16 billion of electricity in the U.S. is unusable energy—but still billable."— U.S. Department of Energy--
Overview
Electric motors are naturally inefficient when drawing power, which leads to wasted energy and higher bills. Even high-efficiency air conditioners, refrigeration systems, and appliances lose power through heat and electrical distortion. Electricity Optimizers address this by capturing and recycling otherwise lost energy, feeding it back into the motor when needed. This process reduces electrical waste, lowers heat in wires and motors, and extends the lifespan of your equipment—all while cutting energy consumption by an average of 10–25%. Many say that it has similar properties to an oil filter in ways.
Residential & Commercial Benefits
Nearly every home and business uses motor-driven systems—HVAC units, refrigerators, freezers, washers, dryers, and pumps—that can be optimized for efficiency. Commercial facilities benefit even more due to their higher energy demands. Reducing wasted electricity directly lowers operating costs, supports business growth, and enhances sustainability.
Proven Technology
Utility companies have relied on similar power-conditioning technology for decades to stabilize and clean their electrical grids. The same principle applies to these Optimizers: by improving the efficiency of motors and appliances, they reduce kilowatt usage and energy costs without requiring equipment upgrades.
Safety and Compatibility
All units are UL and CuL listed and undergo rigorous quality and safety testing. They function globally on both 50 and 60 Hz systems, compatible with voltages up to 240V.
Specifications
RESIDENTIAL Model: ES1200
Phase: Single (Residential)
Voltage: Up to 240 V
Size: 6″ × 6″ × 4″
Weight: 5.5 lbs
Surge Protection: 2400 J
Service: Up to 200 A
​
COMMERCIAL Model
Phase: Three-Phase
Voltage: Up to 480 V
Size: 10″ × 10″ × 6″
Weight: 12.5 lbs
Surge Protection: 2400 J
Service: Indoor/Outdoor NEMA 3R
Savings Example
Without Optimizer With Optimizer
Home A/C -- WITHOUT 100% WITH 85%
Refrigerator - WITHOUT 100% WITH 88%
Heat Pump -- WITHOUT 100% WITH 82%
Pool Pump -- WITHOUT 100% WITH 84%
Surge Protection
Each unit doubles as a whole-property surge protector, safeguarding your systems from surges and brownouts by absorbing excess voltage up to 2400 joules.
Solar-Ready Integration
Electricity Optimizers pair seamlessly with solar systems. By reducing the energy your motors consume, you use less and can sell more back to the grid—maximizing your return on solar investments.
Installation and Warranty
Installation is simple and typically takes about 20 minutes. One residential unit supports up to 200 amps, while larger properties may require multiple units. Each device includes a 10-year warranty and is designed for a 25-year lifespan with no maintenance required. NOTE - Unless the machine is not functioning (IE. The green light is not on); the warranties require 12 months of bills for consideration. Here is the address in the rare case that occurs.
Warranty Returns Address:
Smart Energy Solutions
3600 South Yosemite St, Suite 800
Denver, CO 80237
Key Features
• Reduces energy waste and improves efficiency
• Extends the life of motors and appliances
• Protects against power surges
• Saves 10–25% on energy costs
• UL/CuL listed and maintenance-free
• Works for residential or commercial use